In the work of the mud filter press, the sludge with water content is transferred to the sludge tanker through the sludge pump, and hydrogen peroxide stabilizer is added together to carry out sufficient mixing and reflection, and then injected into the belt sludge press, the sludge is evenly distributed to the gravity dedrying zone, and under the double correct guidance of the mud rake and the actual effect of gravity, the sludge follows the movement of the dedrying filter belt to remove the mineral acid water of the sludge. Excellent configuration and excellent operation skills integration, can carry out the ideal practical effect. The same is true for sludge dewatering solutions. To achieve the ideal actual effect of sludge dewatering, a considerate filter press is required, and the filter press is actually operated well, so that the economic development of sludge can be used to solve the cost and carry out sludge dewatering.
While the mud filter press uses water in the circulation system, the air pollutants accumulated in various sewage can be converted into harmless or less harmful methods to the natural environment through extraction, destruction and landfill, which can greatly reduce the damage to the green ecology. When the filter press is used in industrial production wastewater treatment, the water should be used repeatedly as much as possible. The original discharge of industrial sewage and municipal engineering wastewater as new water resources can greatly reduce the requirements for groundwater and public water, and also reduce the amount of wastewater discharged.
The current mud filter press mixes the sludge and the water treatment flocculant in the switching valve, and the fine solid particles in the sludge are solidified into flocs with large volume, and at the same time, the dispersed water is separated. Sludge is transferred to the filtration zone where gravity is extracted and dried to produce non-circulating sludge under the effect of gravity, which is then transported between the two filtration zones. Through pre-stressed tension, low voltage and high pressure extrusion working pressure and shear stress, the sludge is slowly squeezed, and the leaching water reaches the sludge and is separated.
Sludge filter press The belt filter press is suitable for urban sewage treatment stations, the pharmaceutical industry, electroplating process, paper industry, leather products, printing and dyeing plants, metallurgical industry, chemical plants, slaughter, food, wine, environmental protection equipment engineering, etc. Sludge dewatering in the whole process of sewage treatment can also be used as solid-liquid separation equipment in industrial production. It is a dream machine for environmental remediation and resource recovery. It can also be used in solid-liquid separation equipment or liquid leaching in industrial manufacturing. Widely used in China's environmental protection equipment engineering.
